Porsche 911 and 912 64-68 SWB
Porsche 911/912 SWB (1965–1968) – Complete Wiring Harnesses
For all model years of the Short Wheel Base (SWB) Porsche 911 and 912, produced between 1965 and 1968, we supply fully pre-assembled wiring harnesses from stock – available for both left-hand and right-hand drive vehicles. Besides all wiring looms each set includes:
Three original-style bulkhead connectors
A brand-new 12-position fuse box with ceramic fuses and the correct original-style label
Model Year 1965:
The windshield washer pump – like in the 901 – was located on the right-hand side below the windshield.
Therefore, the front harness does not include a washer pump wire; it runs through the main chassis harness instead.
Instrument lighting is still integrated into the main wiring loom.
The 911 featured 5 gauges; the 912 had 3.
Fog light wiring is standard in both the main and front harnesses, and was directly switched – without a relay.
Aside from the engine-specific section, the 911 and 912 shared the same harness layout.
For example, in the 912, the wires for the oil level sensor were present but simply taped off.
All 1965 models used bullet terminals on the ignition switch.
The 912 had a different alternator connection compared to the 911.
Model Year 1966:
The washer pump was relocated to the left-hand side, near the battery.
The front harness was modified to include a dedicated wire for the washer pump.
The ignition switch was updated to use spade terminals instead of bullet connectors.
Fog lamps continued to be directly switched with no relay and the instrument lighting wiring became a standalone sub-harness
Model Years 1967–1968:
Regulations required that fog lamps could only be used in combination with low or high beam. As a result, a separate optional fog lamp harness with relay was introduced and no longer integrated into the main chassis harness.
Additional Specifications:
All harnesses are finished with original-style PVC tubing.
Exception: vehicles built in Zuffenhausen were originally taped, and we reproduce them that way as well.
Optional wiring for the Webasto auxiliary heater is also available.
Refine Search
12 V Dashboard lamp BA7S 2W lamp set (20 piece) art.no 12V.2W.BA7S.SET
For dashboard lighting, instruments, switches etc.Color: brightDiameter: 6.8mmLength: 20mmCurrent: 1..
17.00 €
12 V Dashboard lamp T5 Wedge 1,2W lamp set (20 piece) art.no 12V.1.2W.T5.SET
For heater panel lighting, instruments, switches etcColor: brightDiameter: 4.6mmLenght 20mmWatts: 1...
16.00 €
Diode for Webasto heater Porsche 911 1965-1968 art.no: VALVOBYY20
The BYY20 is a silicon high current rectifier (anode connected to case)Its used on Webasto heater ha..
22.00 €
Fusebox label for 911-912 12 pole fusebox 1964-1968 (for original fusebox) art.no FUSEBOXLABEL65-68ORIGINAL
Fusebox label for the 911 or 912 1964 till 1968, fits in original 12 pole fusebox.Stop/turn signal/b..
8.00 €
Fusebox label for 911-912 12 pole fusebox 1964-1968 (for replica fusebox) art.no FUSEBOXLABEL65-68REPLICA
Fusebox label for the 911 or 912 1964 till 1968, fits in replica 12 pole fusebox.Stop/turn signal/ba..
8.00 €
Instrument bulb holder T4 art.no 999.632.014.00
For dashboard lighting, fan heater panel, ignition switch etcDiameter: 8mmLength: 19,5mm..
8.00 €
Self fusing butyl rubber tape art.no BUTYLTAPE5M
Self fusing butyl rubber tape, for example to be used on where the tunnel harness exits the firewall..
9.00 €